LTE910-EU1 Cat.1
LTE RS232 modem with Cat.1 specification
The LE910 series expands and it is now featuring a set of variants to address the LTE low category technology.
LTE910 Cat.1 delivering data rates of 10 Mbps
downlink and 5 Mbps uplink. Single-mode LTE are the
the perfect optimized solution for networks like Verizon
and AT&T the first to support the LTE low category
technology with an optimal coverage of the territory.
Europe, LIGHTSPEED is proposing also a variant with 2G
KEY FEATURES
• LTE Cat.1: 5- band
B1(2100),B3(1800),B7(2600),B8(900),B20(800)MHz
 2G: B3(1800),B8(900)MHz
• Wireless bearers
   LTE: up to 10Mbps downlink,5Mbps uplink.
EGPRS up to 296Kbps downlink, 236.8Kbps uplink.
• Rx Diversity and MIMO DL 2x2
- Option to disable the secondary antenna
• LTE FDD Cat.1, 3GPP release 9 compliant
• SIM application Tool Kit 3GPP TS 51.014
• Serial port multiplexer 3GPP TS27.010
• SMS over IMS
• Built in UDP/TCP/FTP/SMTP stack
• Control via AT commands according to 3GPP
TS 27.005, 27.007 and Custom AT commands
• RF power (max.) – Class 3 (0.2 W, 23 dBm) LTE
• Power consumption (estimates)
The electrical design for the Power supply should be made ensuring it will be capable of a peak current output of at least:
0.8 A for LTE mode (3.80V supply).
• Supply voltage nominal 6V-26VDC
 
INTERFACES
• Standard DB9 RS232 serial
• SIM card interface (3V/1.8V)
• Power supply, Power switch
• External antenna FME female interface
Others
• Size 8cm x 5cm x 2.3cm Weight 100 g
• Temperature Range -40°C to +85°C
 
電話:+886-3-5396570傳真:+886-3-5401872地址:新竹市牛埔東路526巷20號EMAIL:peter@lightspeed.com.tw
COPYRIGHT © WWW.LIGHTSPEED.COM.TW ALL RIGHTS RESERVED.Design by WELI